Vivotek ND8422P - Access List

VIVOTEK - Built with Reliability
162 - User's Manual
The access control applies to the access from a web client over HTTP and RTSP protocols.
Three access conguration options are available:
1. Allow all: Allows access from all IP addresses.
2. Allow only: Allows access only from the listed IPs. You should manually enter the IPs for
computers that need to access the NVR.
Note that you can use the asterisk (*) mark to represent all decimal numbers in each
individual octet of the range of IP address: such as using 172.16.0.* for addresses ranging
from 172.16.0.1 to 172.16.0.254.
A decimal number between two asterisks, e.g., <172.*.10.*>, is considered as invalid.
5-5-2. Access list
3. Deny only: Denies the access from the listed IPs. You should manually enter the IPs for
computers that will be blocked out from the access. The conguration details is the same as
those for the Allow only methodology.