VYBO Electric Vector V800 - Page 153

Chapter 5: Detailed description of parameters
147
P7.05
LED display during
STOP
Default
33
Setting
range
0000
-FFFF
If we need to display parameters during run, set the
corresponding bit to 1 and set the hexadecimal equivalent
of this binary number in P7.0.
P7.06
Load speed display
coefficient
Default
1.0000
Setting range
0,0001 – 6.5000
This parameter serves to set the relation between the inverter output frequency and the
load speed. For details, see P7.12.