VYBO Electric Vector V800 - Group PP: Restoring the Factory Setting and Blocking the Change of Parameters; Group C0: Torque Control and Parameter Limitation

Chapter 4: List of function parameters - shorted
90
Group PP: Restoring the factory settings and blocking
the change of parameters
Function
code
Parameter name
Setting range
Default
setting
Attribute
PP.00
User Password
0 - 65535
0
☆
PP.01
Restore factory
settings
0: No activity
01: Restore factory setting except motor
parameters
02: Delete records
11: High frequency control activated
0
★
PP.04
Blocking of
parameter changes
0: Parameter change allowed
1: Parameter change is blocked
Group C0: Torque control and parameter limitation
C0.00
Selection of control
the speed / torque
0: Speed control
1: Torque control
0
★
C0.01
Torque control source
settings
0: Digital setting (C0.03)
1: FIV
2: FIC
3: Reserved
4: IMPULSE setting, option
5: Communication setting
6: MIN (FIV,FIC )
7: MAX (FIV,FIC )
0
★
C0.03
Digital setting of
torque control
-200.0% - 200.0%
150.0%
☆
C0.05
Maximum frequency
forward at torque
control
0.0 Hz – maximum frequency
50.00Hz
☆
C0.06
Maximum frequency
backward at torque
control
0.0 Hz – maximum frequency
50.00Hz
☆
C0.07
The acceleration time
for torque control
0.00s - 650.00s
0.00s
★
C0.08
The deceleration time
for torque control
0.00s - 650.00s
0.00s
☆
Groups C1-C4: Reserved