VYBO Electric Vector V800 - Page 67

Chapter 4: List of function parameters - shorted
61
P4.10
V/F over excitation
0 - 200
64
☆
P4.11
V/F suppression of
oscillation
0-100
by the
model
☆
P4.13
Voltage source for
V/F separation
0: Digital setting (P4.14)
1: FIV
2: FIC
3: Reserved
4: Impulse setting (S3), option
5: Step speed
6: Simple PLC
7: PID
8: The communication interface, 100%
corresponds to the rated motor voltage
(P2.02)
0
☆
P4.14
Digital voltage
setting for V/F
separation
0V - rated motor voltage
0V
☆
P4.15
Voltage rise time
of V/F separation
0.0s-1000.0s, gives the time it takes to
increase the output voltage from 0 V to
the rated motor voltage
0.0s
☆
P4.16
Voltage drop time
during V/F
separation
0.0s-1000.0s, gives the time it takes for
the output voltage to drop from the
nominal motor voltage to 0 V
0.0s
☆