BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-9
Operation 5
Accident hazard due to jamming or slipping!
Loose objects in the cab or a dirty machine can cause accidents with
serious injuries or death.
► Fasten or remove all loose objects in the cab.
► Keep the control elements clean.
► Perform maintenance daily
– see chapter 7 “Maintenance plan” on page 7-6.
Accident hazard from impaired visibility!
Frozen and/or dirty windows can cause impaired visibility,
which can lead to accidents with serious injury and death.
► Clean window surfaces before starting work.
Accident hazard during machine travel on snow and ice!
Inappropriate speed on snowy and/or icy roads can
cause accidents and injury.
► Adapt your travel speed to the road conditions.
Damage to machine due to technical malfunctions.
► Stop machine operation immediately if a malfunction of the travel drive,
steering and/or brakes is detected.
► Put the machine back into operation only after correcting the
malfunction.
Battery damage!
The battery can be damaged if it is over-discharged.
► Pay attention to the “Battery charge condition” indication.
► Charge the battery in time.
► Only store the battery if it is fully charged.
► Observe charging instructions for new batteries
– see chapter 4 “Notes about low and high external temperatures” on
page 4-46.
To Next Page
Loading...