EasyManua.ls Logo

Wacker Neuson KRAMER 5055e

Wacker Neuson KRAMER 5055e
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-10 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Important safety instructions for machine travel operation
Information
The operating time of the battery depends on the battery charge condition,
the respective operating conditions, the application and on how machine
travel is performed.
see "Operating time of battery" on page 5-69.
Information
The machine is equipped with an operator presence switch to protect the
operator. In this case:
The machine can only be switched on if the operator has taken his
place in the operator seat.
If the operator seat is relinquished for more than 3 seconds during
machine travel, the machine is braked until it comes to a standstill and
the parking brake engaged once in standstill.
Limp home mode
Information
If the accelerator pedal failed due to a defect and the vehicle is in
emergency shutdown, it is still possible to get the vehicle out of a danger
area.
For this purpose, move the switch 55 in the joystick
into the desired travel direction.
- V = forward – arrow A and indicator display B/1 illuminate in the
digital display of the gauge.
- R = reverse – arrow B and indicator display B/2 illuminate in the
digital display of the gauge.
The vehicle accelerates in the select direction at
about 3 km/h (1.86 mph).
To shut down this emergency driving aid, actuate the service brake, the
button 56 (drive – neutral position) or the motor isolating switch.
Fig. 100
V
R
55
A
B
1
2
B
56

Table of Contents

Related product manuals