BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-31
Operation 5
Crushing hazard due to tipping over of machine!
A tipping vehicle can cause serious injury or death.
► Lower the loader unit to transport position during machine travel.
► Adapt the travel speed to the prevailing conditions.
► Adapt the driving speed to the material loaded.
► Pay attention to persons and obstacles.
► Reduce travel speed before performing downhill machine travel.
► Always fasten your seat belt.
► Ensure that no parts of the body protrude outside the vehicle.
► Carefully steer the machine if the loader unit is raised.
► Do not exceed the permissible payloads.
Risk of injury due to material falling from a raised loader unit!
Falling loads (for example, large bales or stacks of bales) can cause
serious or fatal injury.
Never transport several large bales or boxes at the same time.
Only work with a raised loader unit when the machine is at a standstill or
at very low speeds.
Do not tilt in the attachment to the limit with a raised loader unit.
The machine is equipped with an operator presence switch to protect the
operator. In this case:
• The machine can only be switched on if the operator has taken his
place in the operator seat.
• If the operator seat is relinquished for more than 3 seconds during
machine travel, the machine is braked until it comes to a standstill and
the parking brake engaged once in standstill.
To Next Page
Loading...
Need help?
General
