Wacker Neuson KRAMER 5055e

BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-47
Operation 5
Switching off the 3rd control circuit in continuous
operation – SKID STEER attachments
Information
For safety reasons, the machine cannot be switched
on if continuous operation is on (switch lock)!
► Switch off continuous operation before putting the machine into
operation.
C
Fig. 138
A
B
72
A
B
1
73
2
Activity Function
1. Switch off continuous operation of the
3rd control circuit. To do this, push the
rocker switch 73 into position A.
➥ Indicator display - C/2 in
the digital display in the
indicating instrument
extinguishes.
➥ Indicator display
- C/1 in
the digital display
illuminates in the
indicating instrument.
➥ The plug
couplings A+B are not
operational.
2. Disable the 3rd control circuit. To do
this: slide the lock in rocker switch 72
downward and press the rocker switch
to position A.
➥ Indicator display C/1 in
the digital display in the
gauge extinguishes.