BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-63
Maintenance 7
Regular checks and service work on the electrical system
Fire hazard! Blown fuses indicate overloading or short circuits of an
electrical component.
Can cause injury.
► Have the electrical system checked by an authorized service center
before inserting new fuses.
► In order to avoid damage to the electrical system, use only fuses of the
specified load capacity (amperage).
Observe the maintenance intervals
– see "Maintenance plan" on page 7-6.
Daily checks before operating the machine
• Is the light system OK?
• Is the signaling and warning system OK?
Weekly checks
• Electric fuses: only replace malfunctioning fuses with fuses with the
specified amperage.
• Check the electric lines for tightness and chafing and have them
repaired by an authorized service center if necessary.
To Next Page
Loading...
