3-16 BA 357-00 * 3.0 * 35700_03_Einleitung.fm
3 Introduction
Use of attachments
General instructions
The attachments will decide in the first place how the machine is used.
• Different quickhitches are available for the machine. Refer to the
following tables for the certified attachments and the
specific requirements:
Attachments for KRAMER quickhitch facility on page 3-18,
Attachments for SKID STEER quickhitch (currently not available) on
page 3-21 or
Attachments for EURO quickhitch on page 3-23.
• Attachments certified for travel on public roads of Germany must also
be additionally listed in the German ABE/Data Confirmation or in the
license certificate of self-propelled work machines.
• For attachments that are not listed in the National Type Approval
(Germany), the Data Confirmation (Germany), the registration
documents or the following lists for the specific quickhitch, get in touch
with a dealer for authorization (warranty claims)! A Separate
Certification for Vehicles (Germany) made out by the appropriate
national authorities is required!
• This operator's manual only describes how to install, use and remove
the standard bucket, multipurpose bucket and pallet forks
– see chapter 5 “Attachments” on page 5-48.
• Refer to the operator's manuals of the attachments for information on
installing, removing and using other attachments.
Get informed on and follow the legal regulations of your country.
To Next Page
Loading...
Need help?
General
