3-20 BA 357-00 * 3.0 * 35700_03_Einleitung.fm
3 Introduction
For more information about attaching devices, see:
data sheet for attachments §30 para. 10/11/12 StVZO (Germany)
Leaflet with specific instructions for hitching agricultural or forestry equipment onto the machine according to German legislation
Leaflet with specific instructions for hitching winter service equipment onto the machine according to German legislation
Non-approved attachments for machine travel on public roads (Germany)
Pallet forks
357-00S
357-00L
1000237357 1000 (39.37) –
Picking up and transporting
pallets and stacked material
357-00S
357-00L
1000237358 1200 (47.24) –
Pallet forks
4
(hydraulic
lateral displacement)
357-00S
357-00L
1000247565 1200 (47.24) –
Bale spike
4
357-00S
357-00L
1000290452
Tines
1000 (39.37)
Width
1200 (47.24)
Payload
900 kg
(1984.1 lb)
Picking up and transporting
silage, manure or recycling
material
Manure forks
4
357-00S
357-00L
1000292255 1700 (66.92) –
Round bale clamp
4
357-00S
357-00L
1000177701
Clamping
width
800 (31.50)
– 1800
(70.86)
Payload
1200 kg
(2645.5 lb)
Silage bucket with
hydraulic clamp
4
357-00S 1000292250 1600 (62.99)
Multipurpose
forks with grab
4
357-00S
357-00L
1000292215 – –
1. Capacity struck according to ISO 7546/capacity heaped.
2. With screwed-on blade.
3. When using this attachment, install additional reflectors at the rear of the machine (see – see "Machine outside view" on page 3-1 pos. no. 19).
4. See the operator's manual of the attachment for putting the attachment into operation and using it.
5. Fork arms must be folded up and secured during machine travel on public roads.
6. Clearance lights must be installed and functional on the left and right of the attachment during machine travel on public roads.
7. In connection with the rotating beacon and red and white warning identification.
Description
of attachment
Vehicle
Part no.
(model)
Width and
length
mm (in)
Capacity
1
m³ (ft³)
Application
material density
To Next Page
Loading...
Need help?
General
