BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm 4-15
Putting into operation 4
When pulled slowly, the automatic seat belt offers full freedom of
movement. It locks however during abrupt braking.
The automatic seat belt may also lock when passing
through potholes or uneven terrain.
Fastening the seat belt
1. Sit down on the operator seat.
2. Hold seat belt 24 at buckle latch A and run it
steadily over the hips to buckle B.
3. Insert buckle latch A into buckle B until it locks into place audibly.
➥ The seat belt must not be twisted and must run tightly over the hips!
Unfastening the seat belt
1. Hold seat belt 24.
2. Press red button C on buckle B.
➥ Latch A is released from buckle B.
3. Slowly return the seat belt to the retractor.
To Next Page
Loading...