101
W&T Mode TCP client
Subject to error and alteration
contain space characters (0x20), nor can the first cha-
racter be a decimal (0x2E). A server IP or URL is deleted
by entering 0.0.0.0.For additional information refer to
the section Menu: Setup SYSTEM r Setup TCP/IP r DNS-
Server.
Opening the TCP connection
If serial addressing is used, the Com-Server waits to receive
a valid address string. Any data arriving prior to receipt of a
valid addressing are rejected.
Closing the TCP connection
As with using fixed destination parameters, the connection
can be closed using the options Inactivity Timeout and Dis-
connect Char.
To Next Page
Loading...
