151
Subject to error and alteration
Mode FTP client
n Connection Timeout
Default: 300s
This value is a connection timeout which is only effec-
tive together with an activated Inactivity Timeout. After
the Inactivity Timeout expires the Com-Server attempts
to transmit any existing, unsent serial user data for the
duration of the Connection Timeout. If during this time it
does not receive any reply from the FTP server, it assumes
a hung connection. The data are rejected and the connec-
tion reset. To prevent unintended data loss, set this value
accordingly high. A value of 0 deactivates the Connection
Timeout.
18�1�5 Deactivating FTP client mode
Set the following parameters in the menu branch SETUP Port
x r TCP/IP Mode r FTP Client to a value of 0 and save this
change:
... r Server Port
... r Server IP/URL
Alternately you may use the function SETUP Port x r Port Sta-
te r Clear Port Mode. The Connection State in the Submenu
SETUP Port x r Port State must then be named FREE.
To Next Page
Loading...
