W&T Com-Server++ - Com-Server as Telnet Server

156
W&T Mode Telnet Server
19�1 The Com-Server as Telnet server
This mode allows character-oriented data to be exchanged
between a network side telnet client application and the seri-
ally connected device on the Com-Server.
If the telnet server service is activated in the Com-Server, con-
nections from telnet clients are accepted on the configured
port number.
19�1�1 Activating Telnet-Server mode
SETUP Port x
TCP/IP Mode
...
Port List
...
Telnet Port TCP
Telnet Server
Activate yes/no
n Telnet Port TCP
Decimal port number at which the telnet server service can
be reached. The factory default setting is 23.
n
Activate yes/no
Activating the service on the port number configured in
the Port List. The Com-Server only accepts connections if
the telnet service is activated in this menu branch.