63
W&T The basis configuration of the Com-Server
Subject to error and alteration
associated TCP ports the password must be null-terminated
(=[password] + 0x00) and sent to the Com-Server no later
than 2s after the TCP connection has been established. Que-
ries from SNMP managers are only responded to by the Com-
Server if the community corresponds to the system password.
For additional information on using system passwords in
conjunction with the configuration and control ports, see the
section Expanded Services of the Com-Server.
8�3�3 Menu: SETUP System r System Name
The freely configurable system name consisting of max. 31
characters is used to identify the Com-Server. This name is
displayed as an opening message in the client for all Telnet
sessions.
If the tag <wutl> is used inside the system name, the Com-
Server replaces it each time there is an output or communica-
tion with the last three places of its Ethernet address.
8�3�4 Menu: SETUP System r Logfile
The Logfile contains the last (max. 3000) connections and
connection attempts for configuration accesses by the Com-
Server with the associated time stamp and address parame-
ters.
Accesses to the following services are registered:
· Telnet configuration menu (Default = 1111/TCP)
· WBM (if enabled)
· Init Flash Update Port (Default = 8002/TCP)
To Next Page
Loading...