W&T Com-Server++ - Com-Server as FTP Server

140
W&T Mode FTP server
17�1 The Com-Server as FTP server
This mode can be used when the send data are in file format
and the action will always be started from your TCP/IP com-
puter.
If the FTP-Server service is enabled in the Com-Server, connec-
tions to configured port numbers are accepted by FTP clients.
Using the example of the destination-oriented FTP client al-
ways included with Windows the invoking looks like this:
ftp [IP-Number] oder ftp [Host name]
After entering the FTP command you can acknowledge the
polling of the login name using ENTER.
17�1�1 Activating FTP-Server mode
SETUP Port x
TCP/IP Mode
...
Port List
...
FTP Port TCP
FTP Server
Activate yes/no
n FTP Port TCP
Decimal port number at which the FTP-Server service of
the Com-Server is reached. The factory default setting is
21.
n
Activate yes/no
Activating the service on the port number configured in
the Port List. The Com-Server only accepts connections if
the FTP-Service is enabled in this menu branch.