W&T Com-Server++ - Configuring FTP Destination

145
Subject to error and alteration
Mode FTP client
18�1�1 Configuring the destination address and port no�
SETUP Port x
TCP/IP Mode
...
FTP Client
...
Server Port
Server IP/URL
Regardless of whether the FTP protocol is handled automati-
cally or with the help of the serial protocol string, the address
data for the respective FTP server must be configured in this
submenu.
n
Server Port
Port number that the FTP server addresses (Standard-FTP-
Port: 21)
Format: decimal
n
Server IP/URL
IP address or URL of the TCP/IP computer on which the
FTP-Server is active.
Format: Dot notation or URL
1
A URL can only be assigned in conjunction with a
valid DNS server. The name used is not allowed to
contain space characters (0x20), nor can the first cha-
racter be a decimal (0x2E). A server IP or URL is deleted
by entering 0.0.0.0. For additional information refer to
the section Menu: Setup SYSTEM r Setup TCP/IP r DNS-
Server.