147
Subject to error and alteration
Mode FTP client
n [STOR/APPE/RETR/LIST] [dir/file]
Open connection Close connection
LIST
RETR
Directory
File
The connection is
opened when any
character is received
at the serial port. This
character is not sent.
The connection is
closed when the FTP
server has sent all data.
APPE
STOR
File
File
The connection is
opened when the first
character to be sent is
received at the serial
port.
The connection is
closed when no serial
data have arrived
during the time period
specified under Inacti-
vity Timeout or when
the Protocol Char was
received.
1
A maximum of 80 characters are available
for all commands! Commands are case sensitive.
Opening the automatic FTP connection
After saving the connection data, the Com-Server waits to re-
ceive any serial character. This is the trigger for opening the
connection. After successful login on the FTP server using the
configured password, the stored command is executed. In the
case of STOR or APPE the connection-triggering character is
sent and written to the file.
To Next Page
Loading...
