49
W&T Configuration access to the Com-Server
Subject to error and alteration
always just one level of the selected menu. Simply entering
the number of the desired menu and pressing the ENTER key
takes you to the next level. Entering a q or pressing the EN-
TER key takes you back to the previous menu level.
The last configured value of a menu item appears in paren-
theses. If you make changes, the new value will appear at
this point the next time the menu is opened. It only becomes
effective in the Com-Server itself however if you have saved it
using SAVE Setup.
As long as you do not open this menu item, you can move
around in the entire menu and change values without actually
changing anything.
1
Positioning functions for the cursor (arrow keys) or
correction actions (backspace, insert) are not available
within the telnet configuration and, if used, will result in faul-
ty inputs. If you make a typing mistake, exit the menu item
using <Enter> and then repeat the entire entry.
To Next Page
Loading...
