Waters 2414 - B Specifications; Physical Specifications; Environmental Specifications

June 11, 2015, 715004754 Rev. A
Page 127
B Specifications
This appendix lists individual operating specifications for the 2414 RI detector.
Note: All performance specifications are measured following a warm-up period of
two hours and with ΔT <
+2 °C/hr.
B.1 Physical specifications
The following table lists the physical specifications for the 2414 RI detector.
B.2 Environmental specifications
The following table lists the environmental specifications for the 2414 RI detector.
Table B–1: Physical specifications
Attribute Specification
Width 34.3 cm (13.5 inches)
Height 20.8 cm (8.2 inches)
Depth 61.0 cm (24.0 inches)
Weight 15.9 kg (35.0 pounds)
Table B–2: Environmental specifications
Attribute Specification
Audible noise < 58 dBA
Operating temperature range 15 to 40 °C (59 to 104 °F); avoid direct
exposure to sunlight and heating and
cooling vents.
Operating humidity range 20 to 80%, non-condensing
Shipping and storage temperature range –30 to 60°C (–22 to 140 °F)
Shipping and storage humidity range 20 to 85%, non-condensing