June 11, 2015, 715004754 Rev. A
Page 88
Figure 5–18: Effects of attenuation/sensitivity settings
Figure 5–19: Effects of filter time constant settings
5.6.1.1 Temperature
These screens control the internal detector oven and, if configured, Waters column
heater module. These screens are the same for RIU and 410 modes.
Figure 5–20: Temperature screen 1
Figure 5–21: Temperature screen 2
Sens = 16
Sens = 64
RIU mode
410 mode
RIU-FS = 156
RIU-FS = 625
Low filter
High filter
time constant
setting
time constant
setting
To Next Page
Loading...
