November 16, 2016, 715004521 Rev. C
Page iv
Contacting Waters
Contact Waters with enhancement requests or technical questions regarding the use,
transportation, removal, or disposal of any Waters product. You can reach us via the Internet,
telephone, or conventional mail.
Safety considerations
Some reagents and samples used with Waters instruments and devices can pose chemical,
biological, or radiological hazards (or any combination thereof). You must know the potentially
hazardous effects of all substances you work with. Always follow Good Laboratory Practice, and
consult your organization’s standard operating procedures as well as your local requirements for
safety.
Safety hazard symbol notice
Documentation needs to be consulted in all cases where the symbol is used to find out the
nature of the potential hazard and any actions which have to be taken.
Considerations specific to the UPC
2
system
Power cord replacement hazard
Waters contact information
Contacting medium Information
Internet The Waters Web site includes contact information for Waters
locations worldwide. Visit www.waters.com.
Telephone and fax From the USA or Canada, phone 800-252-4752, or fax
508-872-1990.
For other locations worldwide, phone and fax numbers appear in
the Waters Web site.
Conventional mail Waters Corporation
Global Support Services
34 Maple Street
Milford, MA 01757
USA
Warning: To avoid electric shock, use the SVT-type power cord in the United States and
HAR-type (or better) cord in Europe. The main power cord must be replaced only with one
of adequate rating. For information regarding what cord to use in other countries, contact
your local Waters distributor.
To Next Page
Loading...
