Wieland SP-SDIO - Page 4

Table of Contents
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
4
3.6
COMPACT module SP-COP2-ENI
26
3.6.1
Description
26
3.6.2
Display elements, error codes, and terminal description
26
3.7
COMPACT SP-COP-CARD1 removable storage
26
3.7.1
Description
26
3.8
SP-SDIO input/output expansion module
27
3.8.1
Description
27
3.8.2
Display elements and terminal assignment
28
3.8.3
Internal circuits
29
3.8.4
Deactivating the test pulses at the outputs of the SP-SDIO
30
3.8.5
Single-channel use of outputs on the SP-SDIO
30
3.9
SP-SDI input/output expansion module
31
3.9.1
Description
31
3.9.2
Display elements and terminal assignment
32
3.9.3
Internal circuits
32
3.10
SP-DIO input/output expansion module
33
3.10.1
Description
33
3.10.2
Display elements and terminal assignment
34
3.10.3
Internal circuits
35
4
Connecting devices
37
4.1
Safety command devices and electromechanical safety switches
39
4.1.1
Emergency stop buttons (e.g. SNH series)
39
4.1.2
Electromechanical safety switch without lock (e.g. SMS series)
39
4.1.3
Electromechanical safety switch with lock (e.g. SIN series)
40
4.1.4
Enable switch
41
4.1.5
Two-hand control
42
4.1.5.1
Type IIIA
42
4.1.5.2
Type IIIC
42
4.1.6
Safety mats and bumper
43
4.1.7
Diode pairs for safety mats
43
4.1.8
Mode selection switch
44
4.1.9
Potential-free contacts
44
4.2
Contactless safety sensors
45
4.2.1
Magnetic safety switches (e.g. SMA series)
45
4.2.1.1
Magnetic safety switches with equivalent inputs
45
4.2.1.2
Magnetic safety switches with complementary inputs
45
4.2.2
Inductive safety switches
45
4.2.3
Transponder switches
46