Wieland SP-SDIO - Page 5

Table of Contents
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
5
4.3
Testable single-beam safety light barriers
47
4.3.1
Testable type 2 single-beam safety light barriers
47
4.3.2
Testable type 4 single-beam safety light barriers
47
4.3.3
Customer-specific testable single-beam safety light barriers
48
4.3.4
Information on installing testable single-beam safety light barriers
48
4.4
ESPE – Electro-sensitive protective equipment
50
4.5
Safety outputs
50
5
Special functions
51
5.1
Muting
51
6
Installing/removing
52
6.1
Installing modules on standard rail
52
6.2
Removing modules from normal rail
55
7
Electrical installation
57
7.1
Requirements for electrical installation
57
7.2
Internal wiring of the supply voltage
59
8
Configuration
60
9
Commissioning
61
9.1
Total acceptance of the application
61
9.2
Tests before initial commissioning
61
10
Diagnostics
62
10.1
What to do in the event of an error
62
10.2
Error statuses
62
10.3
Error displays in the state LEDs, error messages, and measures for
error elimination
63
10.3.1
Device state and LED displays in the COMPACT modules (SP-COP1,
SP-COP2-ENx)
63
10.3.2
Device state and LED displays in the expansion modules (SP-SDIO, SP-
SDI)
65
10.3.3
Device state and LED displays of the expansion module (SP-DIO)
65
10.4
Wieland Support
67
10.5
Expanded diagnostics
67
11
Maintenance
68
11.1
Regular testing of the safety equipment by qualified persons
68
11.2
Replacing devices
69
11.2.1
Safety measures when replacing devices
69