1 Getting started
Register your Chameleon at wisiconnect.tv
After registration and uploading the entitlement file to the
Chameleon, your purchased Software Options are loaded, and a 30 days trial
period for all Software Options is initiated.
Assemble in base unit
Mount your Chameleon in the base unit, and connect the power supply.
Connect: 192.168.0.20
Use an IP cable, start your web browser, and connect by entering
192.168.0.20 in the address field of the browser. Make sure your computer or
network adaptor has an IP address in the same IP range.
Change the IP address (optionally)
When using a system of Chameleons, it is recommended to change the default
management address 192.168.0.20 to a system unique IP address.
Configure your Chameleon
Connect and configure inputs and outputs. Select services from your inputs to your outputs.
To Next Page
Loading...
