14 Software options
Chameleon “products” range from receiver, to edge, to streamer and to scrambler. The different “products”
realisations are controlled by the Software Options enabled in any specific Chameleon module.
To get an overview of all different Software Options currently available, please contact your sales representative or
contact the Chameleon Support.
List of uploaded Software Options
Under the Status tab, all enabled Software Options are listed.
How to get and upload additional Software Options
Please contact your sales representative at WISI to get information
Available software options for the Chameleon modules
Please note that some functionality, e.g. the N+1 redundancy, is managed by the GT11 embedded switch in the
GN50 base unit, and the Software Option GNNRED for N+1 redundancy is purchased for the GN50.
Software Options are enabled.
Don’t forget to order Software
Options needed for the actual