Wisi Chameleon Installation Guide

©WISI Communications 2015, Subject to technical changes and misprints
73
www.
www.wisi.de
Adding a new task
1. Click Add new task
2. Enter a name for the task
3. Set Enable to OFF if you want to save but not execute the task
4. Select the schedule periodicity (daily, weekly, monthly, yearly or once)
5. Set the date, day, time parameters for the task
6. Enter the LUA commands in the Lua script window
7. Click the “yellow tick” , or click enter
Running (testing) a task
You can test a task / the LUA commands manually by clicking the menu icon, , to the right of a task, and
selecting Execute Script in the pop-up menu.
12.4 SNMP
SNMP, Simple Network Management Protocol
SNMP can be used for alarms (traps/notifications) or to read (Get) or write (Set) information from/ to a
Chameleon. To use SNMP, you need an NMS (Network Management System) that is connected to the Chameleon.
For information about available LUA
commands, please contact Support.

Wisi Chameleon Specifications

General

Brand	Wisi
Model	Chameleon
Category	Amplifier
Language	English