Chapter 3
Maintenance
Table of
Contents
This chapter contains the following topics:
Table of Contents......................................................................... 3-1
Maintenance ................................................................................. 3-1
Handling and Treatment of CPU-NXT 3.2.........................................3-1
Installing New Solid State Drive ........................................................3-2
Remove the old Solid State Drive ......................................................... 3-2
Install a New Solid State Drive .............................................................. 3-3
Replacing CPU Fan ..........................................................................3-4
Remove Existing CPU Fan ................................................................... 3-4
Install New CPU Fan............................................................................. 3-5
Removing/Installing Memory Module................................................3-7
Removing Memory Module ................................................................... 3-7
Installing Memory Module ..................................................................... 3-7
Replacing CPU-NXT 3.2 Enclosure Fan...........................................3-8
Remove Existing CPU-NXT 3.2 Enclosure Fan .................................... 3-8
Install New CPU-NXT 3.2 Enclosure Fan ............................................. 3-8
Removing/Installing Jurisdictional SPI and BIOS ...........................3-10
Remove the JUR SPI Assembly or BIOS Firmware Assembly ........... 3-10
Install the JUR SPI Assembly or BIOS Firmware Assembly ............... 3-11
Replacing CR2450 Batteries...........................................................3-12
Changing the PATA Board ..............................................................3-13
Prepare CPU-NXT 3.2 for Shipping .......................................... 3-16
Maintenance This section provides maintenance procedures for CPU-NXT 3.2.
Handling and
Treatment of
CPU-NXT 3.2
CPU-NXT 3.2 is a sturdy device that has been designed to withstand the following actions:
Opening and closing a game door
Opening and closing the CPU Enclosure door
Installing and removing the CPU Enclosure from the game
Shipping CPU-NXT 3.2:
- in the WMS-approved single unit shipping box
- in the WMS-approved bulk pack shipping box
Moving a game with a hand truck
For details on shipping CPU-NXT 3.2, see Prepare CPU-NXT 3.2 for Shipping on page 3-16.
CAUTION: CPU-NXT 3.2 can be damaged if misused. Do not let the game cabinet fall over in or out
of the shipping box.
16-1408348
Aug 2012
To Next Page
Loading...