03/2016 – UM-MT-EN-01 109
8.4 Top Speeds Upgrade
Constant Supervision is Required!
When training at faster speeds, especially from a top speed upgrade, there
is an increased chance of injury or damage from falling.
► Always supervise users when training at top speed.
► Do not train at top speed until you have reached the proper condition-
ing and training level necessary to train safely.
Options are available to increase top speeds depending on the model. These options are
mainly used for sports medicine and the training of elite, conditioned athletes (some will
require 208/230V) and vary depending on the treadmill model.
8.5 RS-232 Remote Computer Control
This option enables you to switch between the treadmill display and a remote computer
for remote control operation. Programs are available from WOODWAY.
WOODWAY treadmills are tested to UL/CSA standards with an Intel DG41RQ computer.
8.6 TV Programming, 4Front/Pro/Pro-XL
You can move around any menu using the following buttons:
Move across the main settings tab on the top of the display and change option values
within a menu screen.
Move up and down the option selections within a menu.
Exit the menus.
The process by which the user can change the TV input is the same throughout both
North America and Europe. To change the TV input, perform the following steps:
1. Press the INPUT button.
2. Use the CH [+][-] buttons to move up and down the menu.
Once you have selected your input source, press the ENTER key to accept it.
8.6.1 North America
To access the LCD programming options:
1. Turn on the TV.
2. Be sure that the TV input is selected, if not:
Press the INPUT key until you see the input selection box.
Use CH[+] and/or CH[-] buttons to navigate up and down.
Once the TV input is highlighted, press the ENTER key to confirm your selection.
To Next Page
Loading...
