03/2016 – UM-MT-EN-01 57
6.4.6 Pro/Pro XL
Tools required for assembly:
1 x combination wrench, ½”
1 x ratchet wrench, ½”
1 x Phillips screwdriver, #2
1 x Allen key, ¼”
1. Remove the cover plates
and side covers on both
sides.
Fig. 51 Pro/Pro XL assembly, side covers
2. Insert wire and protective
cover into the handrail tube
to prevent damage during
insertion.
Fig. 52 Pro/Pro XL assembly, wiring
3. First slide the cover plates
over the railing.
4. Insert both sides of the rail-
ing into the mounts.
Note:
Do not damage the
wires!
Be careful not to pinch
yourself!
Fig. 53 Pro/Pro XL assembly, insert railing
To Next Page
Loading...
