RJ-901C/RJ-900C 　 Maintenance Manual 5 Self-Diagnosis Mode
5-53
NOTE
If you update any parameter in the parameter update menu, always turn the power OFF after quitting
the menu. The updated parameters will not be stored in the flash memory unless the system power is
turned OFF as normal procedure..
Head ID parameter update menu
CW Adjustment parameter update menu Low1
CCW Adjustment parameter update menu Low1
CCW Adjustment parameter update menu Low
CW Adjustment parameter update menu High2
CW Adjustment parameter update menu Low2
Print Position Adjustmet parameter update men
To Next Page
Loading...
Need help?
General
