4 Toner cover
Open this cover to access and replace the toner/dry ink cartridges.
5 Front door/cover
Open this door/cover to clear paper jams and to replace various Customer Replaceable
Units (CRUs).
6 Paper Trays 1, 2, and 3
Trays 1, 2, and 3 are identical. The trays accommodate a variety of sizes and weights;
refer to the Specifications chapter for detailed information. All stock types can be used
except for envelopes, and stock can be loaded either in the Long Edge Feed (LEF) or
Short Edge Feed (SEF) direction.
7 Interface Module
The Interface Module is required with many of the optional finishing devices. It serves
as a communication device between the print engine and any attached finishing
devices.
8 Optional finishing device
Shown is the optional Booklet Maker Finisher with the optional C/Z Folder. The Booklet
Maker Finisher requires the Interface Module. Other optional finishing devices are
available.
Bypass (Tray 5)
The Bypass tray, also called Tray 5 or Multisheet Inserter, accommodates all types of
stock in various size and weight ranges. The tray holds a maximum of 250 sheets of 20
lb./75 gsm plain paper.
The Bypass tray is a paper tray on the left-hand side of the machine. It can be folded
away when not in use. When the tray is in use and it is lowered, the tray can be extended
to support long length stock.
Note
The mounting location for the Bypass tray varies when optional feeding devices are
added to the machine configuration.
Xerox
®
Color C75 Press1-2
User Guide
Product overview
To Next Page
Loading...
Need help?
General
