EasyManuals Logo

Xerox Color C75 Press User Manual

Xerox Color C75 Press
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
Heavyweight 1 or Coated 1 modes because they will be fed face-up into the
inverter.
Looking at the paper size on the ream wrapper can identify Long Grain paper.
The second number in the size indicates the grain direction. For example 11 x 17
in./A3 indicates the grain is in the 17 inch/431.8 mm direction. This paper is Long
Grain. 17 x 11 in./A3 indicates the grain is in the 11 inch/279.4 mm direction.
This paper is Short Grain.
Heavyweight 1 or Coated 1 Papers labeled 11 x 17 in./A3, 12 x 18 in./304.8 x
457.2 mm, 13 x 19 in./330.2 x 482.6 mm, etc. are Long Grain and should be fed
in Heavyweight2/Coated 2 mode. If your paper is not supplied with a wrapper,
check with your paper supplier about the grain direction.
Figure 1. For Heavyweight 1 or Coated 1 papers (106 - 176 gsm) 17 inch/431.8 mm or larger
Feed these in Heavyweight 1/Coated 1 modes.
Feed these in Heavyweight 2/Coated 2 modes
.
Preventing fuser damage
1. To avoid 11 in./279.4 mm lines and wear marks, you may require the use of two
fusers - one when running 8. 5x 11 in./A4 stock, and the other when running 12 x
18 in./304.8 x 457.2 mm or larger stock. This is especially true for the graphic arts
people.
2. Image quality defects such as marks or spots will occur every 110 mm/4.3 in. on the
prints if the fuser roll is damaged. Defects which occur every 98 mm/3.89 in. indicate
a damaged fuser belt.
Xerox
®
Color C75 Press10-38
User Guide
Problem solving

Table of Contents

Other manuals for Xerox Color C75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color C75 Press and is the answer not in the manual?

Xerox Color C75 Press Specifications

General IconGeneral
Copy speed (black, normal quality, A4)75 cpm
Maximum print sizeA3 (297 x 420 mm)
Media types supported64 – 300 g/m2
Standard input capacity1900 sheets
Maximum resolution2400 x 2400 DPI
Standard printer languagesPCL 5c, PCL 5e, PCL XL, PDF 1.7+, PostScript 3
Standard interfacesUSB 2.0
Networking featuresTCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
Internal memory- MB
Maximum duty cycle300000 pages per month
Power requirements100-240 VAC, 50/60 Hz
Dimensions (WxDxH)1714 x 777 x 1372 mm
TypeDigital copier

Related product manuals