Xerox Color C75 Press User Manual

5. Gently move Tray 6 back into position.
HCF (1 Tray) fault codes
If an error caused the printing to end abnormally, or a malfunction occurred in the
machine, then an error code is displayed. When an error code is displayed, all print data
of the machine as well as print data stored in the machine's built-in memory is discarded.
Note
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact the Xerox Customer Support Center.
024-955
Cause: Tray 6 is empty/out of paper.
Remedy: Add paper to Tray 6.
024-974
Cause: The designated paper size and size of paper in the tray differ when feeding
paper from the inserter.
Remedy: Reset the paper or cancel the job.
078-100
Cause: (Optional) Paper Tray 6 malfunctioned.
Remedy: Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.
078-101
Cause: (Optional) Paper Tray 6 malfunctioned.
Remedy: Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.
Xerox
®
Color C75 Press12-6
User Guide
High Capacity Feeder (1-tray HCF/Tray 6)

Xerox Color C75 Press Specifications

General

Copy speed (black, normal quality, A4)	75 cpm
Maximum print size	A3 (297 x 420 mm)
Media types supported	64 – 300 g/m2
Standard input capacity	1900 sheets
Maximum resolution	2400 x 2400 DPI
Standard printer languages	PCL 5c, PCL 5e, PCL XL, PDF 1.7+, PostScript 3
Standard interfaces	USB 2.0
Networking features	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
Internal memory	- MB
Maximum duty cycle	300000 pages per month
Power requirements	100-240 VAC, 50/60 Hz
Dimensions (WxDxH)	1714 x 777 x 1372 mm
Type	Digital copier