Xerox Color C75 Press User Manual

Fuser width switch information
With the launch of this product comes a new line of fuser assemblies. The new fuser
assemblies are equipped with a width switch. Before installing a new fuser, the customer
can select a different switch position, if they have multiple fuser assemblies on site.
Setting the width switch to a desired setting reduces/eliminates the wear marks on their
fuser. This extends the life of the fuser (or multiple fusers).
A rotary switch with a protruding knurled knob is on every new fuser assembly. This is
the width switch.
The width switch on the new fuser assembly has eight different positions: 0-7. Zero (0)
is the default width setting.
This eight-position switch tells the print engine the specific width range of media that
can be run through the fuser. This switch must be set by the customer before the fuser's
first use. It is expected to stay in that position for the life of the fuser.
A label sheet is included in every fuser box.
10-39Xerox
®
Color C75 Press
User Guide
Problem solving

Xerox Color C75 Press Specifications

General

Copy speed (black, normal quality, A4)	75 cpm
Maximum print size	A3 (297 x 420 mm)
Media types supported	64 – 300 g/m2
Standard input capacity	1900 sheets
Maximum resolution	2400 x 2400 DPI
Standard printer languages	PCL 5c, PCL 5e, PCL XL, PDF 1.7+, PostScript 3
Standard interfaces	USB 2.0
Networking features	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
Internal memory	- MB
Maximum duty cycle	300000 pages per month
Power requirements	100-240 VAC, 50/60 Hz
Dimensions (WxDxH)	1714 x 777 x 1372 mm
Type	Digital copier