EasyManuals Logo

Xerox Color C75 Press User Manual

Xerox Color C75 Press
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
8. Return the rear skew adjustment lever to its left, default position.
9. Slide the right-side skew adjustment lever toward the front of the paper tray.
10. Gently push in the tray until it comes to a stop.
11. From the Tray Properties window, enter the correct paper information, including size,
type, weight, and if necessary, paper curl and/or alignment option.
12. Select OK to save the information and close the Tray Properties window.
13. Run your print job.
The paper is fed accurately without skew and the printed output is satisfactory;
your task is complete.
The paper is skewed and the printed output is unsatisfactory; proceed to the next
step.
14. Pull out the tray slowly until it stops.
15. Return the right-side skew adjustment lever toward the rear of the paper tray; this is
its default position.
16. Gently push in the tray until it comes to a stop.
17. If you are still having skew adjustment problems, refer to the Advanced Stock Setup
information located in the System Administration Guide.
Maintenance
Replacing the OHCF feed rolls
The OHCF feed rolls should be replaced when experiencing frequent multifeeds, single
feeds, or blank prints in the stack of the output prints.
Use this procedure to replace the OHCF feed rolls, which includes the following rolls:
Feed Roll
Nudger Roll
Retard Roll
Xerox
®
Color C75 Press13-8
User Guide
Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Table of Contents

Other manuals for Xerox Color C75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color C75 Press and is the answer not in the manual?

Xerox Color C75 Press Specifications

General IconGeneral
Copy speed (black, normal quality, A4)75 cpm
Maximum print sizeA3 (297 x 420 mm)
Media types supported64 – 300 g/m2
Standard input capacity1900 sheets
Maximum resolution2400 x 2400 DPI
Standard printer languagesPCL 5c, PCL 5e, PCL XL, PDF 1.7+, PostScript 3
Standard interfacesUSB 2.0
Networking featuresTCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
Internal memory- MB
Maximum duty cycle300000 pages per month
Power requirements100-240 VAC, 50/60 Hz
Dimensions (WxDxH)1714 x 777 x 1372 mm
TypeDigital copier

Related product manuals