Xerox Color C75 Press User Manual

The booklet is assembled and stapled in the booklet area of the finisher; therefore, the
booklet enters the SquareFold Trimmer Module already assembled. Any adjustments to
the image of the original and its placement on the booklet page must be done from the
machine UI, your print driver, or from the print server.
Note
Always refer to the SquareFold Trimmer Module Hints and Tips section before using the
SquareFold Trimmer Module. The hints and tips section provides valuable information
about setting up your jobs, which in turn ensures the best possible output for your
print/copy jobs.
You may want to run one or more test prints/copies before running larger jobs.
Identifying the components
Main components
The main components consist of:
1. Top Left Cover: Open this cover to remove paper jams. The square fold mechanism
is found in this area.
2. Top Right Cover: Open this cover to remove paper jams. The trimming mechanism
is found in this area.
3. Booklet Output Tray: This tray receives square-fold booklet output from the finisher.
4. Control Panel: The Control Panel consists of a mimic display, buttons, and various
indicator lights.
5. Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to
remove and dispose of trimmer waste scraps.
Xerox
®
Color C75 Press18-2
User Guide
SquareFold Trimmer Module

Xerox Color C75 Press Specifications

General

Copy speed (black, normal quality, A4)	75 cpm
Maximum print size	A3 (297 x 420 mm)
Media types supported	64 – 300 g/m2
Standard input capacity	1900 sheets
Maximum resolution	2400 x 2400 DPI
Standard printer languages	PCL 5c, PCL 5e, PCL XL, PDF 1.7+, PostScript 3
Standard interfaces	USB 2.0
Networking features	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
Internal memory	- MB
Maximum duty cycle	300000 pages per month
Power requirements	100-240 VAC, 50/60 Hz
Dimensions (WxDxH)	1714 x 777 x 1372 mm
Type	Digital copier