3. Load the paper/tabs, aligning it to the front side of the tray.
a) If the paper is preprinted, load the paper with the printed side facing up.
b) If the media is tab stock, load the tab side to be fed first (in the direction of the
arrow as shown in the above illustration).
4. From the Tray Properties window, enter the correct paper information, including size,
type, weight, and if necessary, decurler and/or alignment option
If enabled by your System Administrator, the Paper Tray Properties screen may be
displayed on the UI.
5. Select OK to save the information and close the Tray Properties window.
Maintenance
Standard/Booklet Maker consumable supplies
Xerox supplies, including staples, staple cartridges, and staple waste containers can be
ordered from Xerox by going to www.xerox.com and clicking on either the Contact Us
link for specific contact information/telephone numbers in your area or by clicking on
the Supplies and entering/selecting your specific machine information (product family
and model type).
Note
Always refer to www.xerox.com for the latest Customer Replaceable Units (CRUs) part
numbers.
Store supply items and Xerox parts in their original packages in a convenient location.
Supply Unit Shipped with finisher/Reorder QuantitySupply Item
4 staple cartridges (5000 staples per cartridge) and 1
staple waste container per carton
Staple cartridge/staple waste contain-
er
4 pack: 5000 staple refills eachBooklet Maker Finisher staple cartridge
17-7Xerox
®
Color C75 Press
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General
