3. Close the tray cover.
4. Reload paper into the tray and resume copying/printing.
Envelope jams in the Bypass tray
Note
Envelopes can be fed only from the Bypass tray. Check that the envelopes are within
specification.
Carefully read and adhere to the following guidelines when using envelopes in the Bypass
Tray:
• Always ensure that the Bypass tray guides are against the edges of the envelopes.
• Check that the attributes of the paper tray are set correctly.
• Some wrinkle is expected on the back of the fed envelope.
Inverter jams (bottom right cover)
1. If a finisher is installed, follow the instructions on the UI for opening the front door
of the finisher and accessing the Inverter bottom right cover.
Xerox
®
Color C75 Press10-12
User Guide
Problem solving
To Next Page
Loading...
