Xerox Color C75 Press - Page 237

Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-218
Cause: Stacker full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-219
Cause: HCS front door fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-220
Cause: Stacker upper/lower limit fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-221
Cause: Stacker upper/lower limit fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-224
Cause: Paper in/out sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-225
Cause: Paper in/out sensor failure
Remedy: Perform the following:
16-15Xerox
®
Color C75 Press
User Guide
High Capacity Stacker (HCS)