Printer Connection and Software Installation 102
13 Wait a few minutes until the printer restarts to establish the wireless network.
14 Click Next.
15 Follow the on-screen instructions until the "Check Setup" screen appears.
16 Print a System Settings page from the operator panel.
See "Printing a System Settings Page" on page 182
17 Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
NOTE:
• When "Link Quality" is "No Reception", check if the wireless settings are correctly configured. To
reconfigure the wireless settings, click Return.
18 Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
19 If you agree to the terms of the License Agreement, click I accept the terms of the license
agreement to continue the installation process, and then click Next.
20 Check if the printer to be installed is listed in the "Select Printer" screen, and then click Next.
NOTE:
• If the printer to be installed is not listed in the "Select Printer" screen, try the following steps:
- Click Refresh to update the information.
- Click Add Printer, and then enter the details of the printer manually.
To Next Page
Loading...
Need help?
General