Using the Operator Panel Menus and Keypad 356
Setting the Time for the Power Saver Mode
You can set the power saving timer for the printer. The printer switches to the Power Saver mode after
the specified time.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select System Settings, and then press the button.
4 Select Power Saving Timer, and then press the button.
5 Select Low Power Timer or Sleep Timer, and then press the button.
6 Press the or button or enter the desired value using the numeric keypad, and then press
the button.
You can select from 1-30 minutes for Low Power Timer or 6-11 minutes for Sleep Timer.
7 To return to the previous screen, press the (Back) button.
To Next Page
Loading...
Need help?
General