Xerox DocuPrint M205 fw User Manual

357 Using the Operator Panel Menus and Keypad
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint M205 f/M205 fw, to initialize the wired network settings, refer to "Initialize NVM" on
page 322.
– For the DocuPrint M205 fw, to initialize the wireless network settings, refer to ."Reset Wireless (DocuPrint
M205 fw Only)" on page 321
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 Select System Section to initialize the menu parameters, and then press the button.
For the DocuPrint M205 f/M205 fw, select User Fax Section to initialize the Address Book
data for fax.
6 Select Yes, and then press the button.
The printer restarts automatically to apply the settings.

Xerox DocuPrint M205 fw Specifications

General

Brand	Xerox
Model	DocuPrint M205 fw
Category	Printer
Language	English