195 Copying
Setting Copy Options
Set the following options for the current copy job before pressing the (Start) button to make
copies.
NOTE:
• After a copy job is completed, the copy options would be kept until the screen returns to Select Function
(auto-reset or the (Back) button is pressed), the CA (Clear All) button is pressed, or the (Copy) button
is pressed again.
This section includes:
• "Number of Copies" on page 196
• "Collated" on page 197
• "Reduce/Enlarge" on page 198
• "Document Size" on page 200
• "Document Type" on page 201
• "Lighten/Darken" on page 202
• "Sharpness" on page 203
• "Auto Exposure" on page 204
• "Multiple Up" on page 205
• "Margin Top/Bottom" on page 207
• "Margin Left/Right" on page 208
• "Margin Middle" on page 209
To Next Page
Loading...
