Xerox DocuPrint M205 fw

201 Copying
 Document Type
You can select the copy image quality.
1 For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2 Press the (Copy) button.
3 Select Document Type, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, and copy size.
See also:
• "Setting Copy Options" on page 195
6 Press the (Start) button to begin copying.
Text Suitable for documents with text.
Mixed* Suitable for documents with both text and photos.
Photo Suitable for documents with photos.