Xerox DocuPrint M205 fw

335 Using the Operator Panel Menus and Keypad
• Initialize NVM
Purpose:
To initialize NVM for system parameters, Address Book data for fax, or Address Book data for e-mail.
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values. (Address Book is available only
on the DocuPrint M205 f/M205 fw.)
See also:
• "Resetting to Factory Defaults" on page 357
Values:
DocuPrint M205 f/M205 fw:
DocuPrint M205 b:
• Non-Genuine Mode
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using non-genuine toner cartridges may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand toner cartridges for
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using consumables not
supplied by Fuji Xerox.
• Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
User Fax Section Yes Initializes the fax number entries in the Address Book.
No* Does not initialize the fax number entries in the Address Book.
System Section Yes Initializes the system parameters.
No* Does not initialize the system parameters.
System Section Yes Initializes the system parameters.
No* Does not initialize the system parameters.
Toner Off* Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.