91 Printer Connection and Software Installation
8 Select Type of wireless network.
9 Configure the security setting, and then click Next.
The "IP Address Settings" screen appears.
10 Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
a Select Type.
b If you have selected Use Manual Address from Type, enter the following items:
• IP Address of your printer
• Subnet Mask
• Gateway Address
When Dual Stack is selected, configure the following:
a Configure IPv4 Settings.
b If you have selected the Use Manual Address check box under IPv6 Settings, enter the
following items:
• IP Address of your printer
To Next Page
Loading...
