6-16
Phaser 3635MFP
GP 8, GP 9
Draft 4
General Procedures and Information
GP 8 DADF Document Feeding Specifications
Purpose
To list the specifications of the documents that can be fed through the DADF.
Specifications
Refer to Table 1.
GP 9 Paper and Media Specifications
Purpose
To list the paper and media size specifications.
Procedure
Refer to the following specifications:
• Paper Specifications
• Transparency Specification
• Envelope Specification
• Label Specification
Paper Specifications
NOTE: Ensure that the paper tray settings match the paper size in the tray.
Refer to Table 1 for the paper and media sizes that can be used in the machine. Refer to Table
2 for the paper or media weight that can be used in the machine.
Table 1 Specifications
Item Specification
Length 145mm - 356mm (5.75 inches - 14inches)
Width 69.9mm - 216mm (2.75 inches - 8.5 inches)
Weight 50gsm - 120gsm (12.5lb - 28lb)
Thickness 0.07mm - 0.13mm
Curl Less than 5mm
Input tray capacity 50 sheets of 80gsm (20lbs) paper
Table 1 Paper and media specifications
Paper Type Mode
Size Input Source
W x L (mm) W x L (inch) Bypass Trays Duplex
Letter Print/Copy/Fax 215.9 x 279 8.5 x 11 X X X
Legal Print/Copy/Fax 215.9 x 355.6 8.5 x 14 X X X
Folio Print/Copy/Fax 216 x 330 8.5 x 13 X X X
Oficio Print/Copy/Fax 216 x 343 8.5 x 13.5 X X X
A4 Print/Copy/Fax 210 x 297 8.27 x 11.69 X X X
JIS B5 Print 182 x 257 7.17 x 10.12 X X (see
NOTE 2)
X
Executive Print 184.2 x 266.7 7.25 x 10.5 X X (see
NOTE 2)
X
A5 Print/Copy 148.5 x 210 5.85 x 8.27 X X (see
NOTE 2)
X (see
NOTE 3)
Statement Print/Copy N/A 5.5 x 8.5 X X (see
NOTE 2)
X (see
NOTE 3)
A6 CARD Print 105 x 148.5 4.13 x 5.85 X
Post card 4 x 6 Print 101.6 x 152.4 4 x 6 X
Hagaki Print 100 x 148 3.94 x 5.83 X
Envelope B5 Print 176 x 250 N/A X X (see
NOTE 2)
Envelope 7-3/4 Print 98.4 x 190.5 3.88 x 7.5 X X (see
NOTE 2)
Envelope
COM-10 (see
NOTE 1)
Print 105 x 241 4.12 x 9.5 X X (see
NOTE 2)
Envelope DL Print 110 x 220 4.33 x 8.66 X X (see
NOTE 2)
To Next Page
Loading...
Need help?
General
