6-36
Phaser 3635MFP
dC131, dC132
Draft 4
General Procedures and Information
dC132 NVM Initialization
Refer to the relevant section:
• NVM Initialization - Copier
• NVM Initialization - Network
• NVM Initialization - Fax Card
NVM Initialization - Copier
Purpose
To return the copier NVM settings to default. Refer to dC131.
Procedure
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Copier Routines, then 132 NVM Initialization - Copier.
4. Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table 1, for the functions that are reset to default:
• All Copier NVM
• Machine Variable NVM
•SA/KO Dust Off
• System Counters Dust Off
5. Switch off the machine, then switch on the machine.
20-810 Fax Transmis-
sion Level
Adjusts the fax transmis-
sion level
0 to 15dBm 12
20-830 Auto Dial Time-
out
Adjusts the auto dial tim-
eout
10 to 100 seconds 55
20-840 FAX Batch Send
Enable
Fax batch send enable Off (0)
On (1)
0
20-900 FAX Total Send
Counter
Total of sent fax pages. 0-0xffffffff 0
20-910 FAX Total
Receive Counter
Total of received fax
pages.
0-0xffffffff 0
Table 5 NVM chain 20
Location NVM Name NVM Description Value Default
Table 1 Copier NVM
Copier file type Category
All Copier
NVM
Machine
Variable NVM
SA/KO Dust
Off
System
Counters
Dust Off
NVM System Usage Counter Y Y
NVM Fault Counter Y Y
NVM Diag Counter Y Y
NVM SAKO Setting Y Y
NVM Fault Log Y
NVM Configuration Y
NVM Diagnostics Y
NVM Debug Y
NVM Mach Var Y Y
NVM Mach Var Zero Y Y
NVM Mach Var Registration Y Y
NVM Mach Var Paper Path Y Y
NVM Mach Var DADF Y Y
NVM Mach Var Platen Y Y
NVM Auditron Y Y
NVM Crash Recovery Y
NVM Completed Job Log Y
To Next Page
Loading...
Need help?
General
